Damaged, leaning or aging fence? We repair wood, chain link, wrought iron and gates across DFW—replacing damaged components and restoring safety, appearance and function.
Why DFW Chooses Us
We evaluate the condition of the entire fence and explain whether a targeted repair or full replacement makes the most sense for safety, durability and cost.
We evaluate the condition of the entire fence and explain whether a targeted repair or full replacement makes the most sense.
We work to match the existing material, height, style and finish so the repaired section blends naturally with the rest of the fence.
Backed by The Ranch Fence Supply, we have direct access to commonly used fence materials and can reduce avoidable sourcing delays.
See the options
From isolated storm damage to aging posts and misaligned gates, our team handles the most common residential and commercial fence problems. We repair the damaged components whenever the remaining fence is structurally suitable to keep.
Repair or replacement of leaning, loose or rotted posts, damaged horizontal rails and unstable fence sections.
Replacement of broken, warped or missing pickets, damaged panels and localized sections without unnecessarily replacing the entire fence.
Correction of sagging or dragging gates, alignment problems, damaged hinges, loose hardware, latches and supporting gate posts.
Our projects Work
Seer our latest projects crafted for our customers in the DFW region.
A&O Texas Solutions repaired an existing custom wrought iron swing gate in Mansfield, TX by cutting and welding new hinges, per the sketch annotation on the approved estimate. The gate itself, finished in Black, remained in place; no fence removal, new posts, or baseboard were part of this scope. This is a focused hinge repair rather than a full gate or fence replacement.
A&O Texas Solutions removed an existing fence and installed a new 6-foot cedar side-by-side privacy fence spanning 65 linear feet in Arlington, TX, finished with a rich Mahogany stain. The project included a new wood-framed gate, a pressure-treated baseboard, and heavy-gauge metal posts set in concrete, with one post placed along the neighboring property line. The full build was completed with free haul-away of all job-site debris.
A&O Texas Solutions removed and rebuilt a 15 linear foot section of 6-foot cedar side-by-side fencing in Haslet, TX. The project included a new 13-gauge metal post set in concrete, finished with a galvanized cap and Simpson bracket, along with pressure-treated rails to properly support the new cedar pickets. The work was completed with free haul-away of all job-site debris.
A&O Texas Solutions restained an existing 8-foot cedar board-on-board fence with cap-and-trim detailing along 75 linear feet in Arlington, TX. The project applied a Medium Brown stain, with the front side stained along the 56-foot street-facing run and both sides stained along the two shorter return sections. One damaged picket was also replaced at no additional cost as part of the service.
A&O Texas Solutions removed an existing fence and installed a new 6-foot cedar side-by-side privacy fence spanning 71 linear feet in Arlington, TX. The project included a new wood-framed gate, a pressure-treated baseboard, and heavy-gauge metal posts set in concrete. The full build was completed over a 3-day schedule, from demolition through final cleanup and debris haul-away, with stain color to be finalized with the homeowner.
A&O Texas Solutions completed a targeted vinyl fence repair in Fort Worth, TX, replacing a 15 linear foot section of 6-foot vinyl fencing along with one new post. The damaged section was removed and rebuilt with a new 13-gauge metal post set in concrete, finished with a galvanized cap and Simpson bracket for a secure, long-lasting fix. The project included free haul-away of all job-site debris.
A&O Texas Solutions repaired an existing board-on-board cedar fence in Arlington, TX, replacing worn sections of cedar pickets along 93 linear feet at mixed 6-foot and 8-foot heights. The scope included two new gates with wood frames and new hardware, a pressure-treated baseboard, and a pre-dip stain finish applied to all new cedar boards. The existing posts were reused, keeping the project efficient while restoring the fence’s strength and appearance.
Residential Cedar Fence in Irving, TX— new cedar with targeted replacement on existing sections
This sheet metal fence in Fort Worth, TX wraps 201 linear feet around a residential lot in the 76110 area, replacing an old chain link fence that offered no privacy at all.
This cedar fence in Murphy, TX replaced 214 linear feet of failing fence around a two-story home in Collin County. The old fence had reached the end of its life in the way most do here.
This cedar fence with trim in Arlington, TX replaced the entire perimeter of a large residential lot — 297 linear feet across four runs, with the old fence torn out and hauled away first.
A side by side cedar fence in Grand Prairie, TX is one of the most practical upgrades two neighbors can share, and this 55-foot project in the 75052 area shows why.
More than just a fence
Fence repair is usually the right option when the damage is limited to specific posts, rails, panels or gates and most of the existing structure remains usable. An inspection can help determine whether repairing the affected area will safely extend the life of the fence.
Built your way
Every repair begins with the condition of the existing fence. We evaluate the original materials, construction style, dimensions and finish to select repair components that restore performance and provide the closest practical match.
We identify the existing picket profile, panel style, wood type, metal finish, height and dimensions to achieve the closest practical match.
Loose posts, damaged rails and weak connections can be reinforced or replaced to stabilize the affected section and prevent additional movement.
When damage is concentrated in one area, we can replace the affected section while preserving the portions of the fence that remain in good condition.
Where practical, new wood or metal components can be coordinated with the existing stain, paint or finish. Natural weathering may create some initial variation.
RECENT FENCE REPAIRS
See examples of damaged posts, panels, gates and fence sections repaired by the A&O Texas Solutions team throughout the Dallas–Fort Worth area.
Common questions
Yes, many fences can be repaired when the damage is limited to individual posts, rails, pickets, panels or gates. If deterioration affects most of the structure, a full replacement may be the safer and more cost-effective option.
We repair many common wood, board-on-board, side-by-side, picket, chain link and ornamental iron fences, as well as residential and commercial gates.
Yes. We can replace individual posts, rails, pickets, panels and localized fence sections when the remaining structure is in suitable condition.
We make every reasonable effort to match the existing style, dimensions, material and finish. New materials may initially look different because older fencing naturally changes color through weather exposure.
Fence repair cost depends on the fence type, number of damaged components, accessibility, materials and structural condition. We provide an estimate after evaluating the affected area.
Yes. We repair localized wind, storm and impact damage when the remaining fence can be safely restored. Severely damaged fences may require partial or complete replacement.
A&O Texas Solutions provides fence repair services in Arlington and communities throughout the Dallas–Fort Worth area.
Contact A&O Texas Solutions today for a free estimate on your next fence, gate or patio cover project.
Only 10% down · Pay when satisfied · Response within 1 hour
Fence & Patio
Download our updated 2026 catalog:
Wood fences, chain link, wrought iron, gates, patio covers, pergolas, decks & concrete for DFW homeowners.
Built for contractors, property managers, and businesses. Explore our full range of commercial fencing solutions for the DFW Metroplex.
