Showcase of Projects in Arlington, TX

A&O Texas Solutions removed an existing fence and installed a new 8-foot cedar fence spanning 194 linear feet in Arlington, TX. Per the estimate and sketch, 170 ft was built in a side-by-side style and 24 ft in a board-on-board style with cap and trim, and the project included a 10-foot-wide double wooden gate. The entire fence was finished in an Espresso stain, with a pressure-treated baseboard and heavy-gauge metal posts set in concrete throughout.

A&O Texas Solutions removed a section of existing fence and installed a new 6-foot cedar side-by-side fence section spanning 20 linear feet with a new gate in Arlington, TX. The project reused the existing posts wherever possible, adding only one new post, and included a pressure-treated baseboard along the new section. This is a focused gate and short fence-run project rather than a full-perimeter replacement.

A&O Texas Solutions removed an existing fence and installed a new 6-foot side-by-side cedar fence spanning 102 linear feet in Arlington, TX. The estimate specifies natural, unstained cedar boards with no baseboard, supported by new heavy-gauge metal posts set in concrete along a fresh concrete path. No gates were included in this project. The full build was completed over a 3-day schedule, from demolition through final cleanup and debris haul-away.

A&O Texas Solutions rebuilt 92 linear feet of an existing 6-foot cedar board-on-board fence in Arlington, TX, replacing the boards, cap, and trim detailing while reusing the homeowner’s existing posts. The project included a new gate, a pressure-treated baseboard, and a full stain finish across the rebuilt fence line, completed with free haul-away of all job-site debris.

A&O Texas Solutions removed an existing fence and installed a new 6-foot cedar side-by-side privacy fence spanning 65 linear feet in Arlington, TX, finished with a rich Mahogany stain. The project included a new wood-framed gate, a pressure-treated baseboard, and heavy-gauge metal posts set in concrete, with one post placed along the neighboring property line. The full build was completed with free haul-away of all job-site debris.

A&O Texas Solutions restained an existing 8-foot cedar board-on-board fence with cap-and-trim detailing along 75 linear feet in Arlington, TX. The project applied a Medium Brown stain, with the front side stained along the 56-foot street-facing run and both sides stained along the two shorter return sections. One damaged picket was also replaced at no additional cost as part of the service.

A&O Texas Solutions removed an existing fence and installed a new 6-foot cedar side-by-side privacy fence spanning 71 linear feet in Arlington, TX. The project included a new wood-framed gate, a pressure-treated baseboard, and heavy-gauge metal posts set in concrete. The full build was completed over a 3-day schedule, from demolition through final cleanup and debris haul-away, with stain color to be finalized with the homeowner.

A&O Texas Solutions repaired an existing board-on-board cedar fence in Arlington, TX, replacing worn sections of cedar pickets along 93 linear feet at mixed 6-foot and 8-foot heights. The scope included two new gates with wood frames and new hardware, a pressure-treated baseboard, and a pre-dip stain finish applied to all new cedar boards. The existing posts were reused, keeping the project efficient while restoring the fence’s strength and appearance.

A&O Texas Solutions replaced wood privacy fence Arlington, TX — demolition and rebuild, no gates

A&O Texas Solutions replaced a failing backyard fence with a 6-foot side by side cedar fence in Arlington, TX — eight feet tall, built on 13-gauge steel posts set in concrete, finished in espresso stain.

Residential wood fence replacement — single-run demolition and rebuild of a collapsing fence

This cedar fence replacement in Arlington, TX swapped 60 linear feet of failing fence for new 6 ft side by side cedar in the 76001 area.