Showcase for Fence Replacement Projects in Texas

A&O Texas Solutions removed an existing fence corner and installed a new 6-foot cedar side-by-side fence section with a matching gate in Euless, TX. The project included a new 13-gauge metal post set in concrete, cedar cap and trim detailing, and a pre-dip stain finish to match the surrounding fence. The work was completed with free haul-away of all job-site debris.

A&O Texas Solutions replaced a 7-foot section of failing cedar fence and re-stained an adjoining 33-foot run (a 16-ft and a 17-ft stretch) in Bedford, TX. The new 7-ft section was rebuilt in a 6-foot board-on-board style with cap and trim detailing, a pressure-treated baseboard, and a new metal post set in concrete, while the existing 33-ft run was refreshed with a matching pre-dip stain so the full fence line reads as one cohesive project

A&O Texas Solutions removed a section of existing fence and installed a new 6-foot cedar side-by-side fence section spanning 20 linear feet with a new gate in Arlington, TX. The project reused the existing posts wherever possible, adding only one new post, and included a pressure-treated baseboard along the new section. This is a focused gate and short fence-run project rather than a full-perimeter replacement.

A&O Texas Solutions removed an existing fence and installed a new 6-foot side-by-side cedar fence spanning 102 linear feet in Arlington, TX. The estimate specifies natural, unstained cedar boards with no baseboard, supported by new heavy-gauge metal posts set in concrete along a fresh concrete path. No gates were included in this project. The full build was completed over a 3-day schedule, from demolition through final cleanup and debris haul-away.

A&O Texas Solutions removed an existing fence and installed a new 8-foot cedar board-on-board fence with cap and trim detailing, spanning 29 linear feet in Richardson, TX. The project included a double pressure-treated baseboard, heavy-gauge metal posts set in concrete, and a Dark Walnut stain finish across the entire fence. The full build was completed over a 3-day schedule, from demolition through final cleanup and debris haul-away.

A&O Texas Solutions rebuilt 92 linear feet of an existing 6-foot cedar board-on-board fence in Arlington, TX, replacing the boards, cap, and trim detailing while reusing the homeowner’s existing posts. The project included a new gate, a pressure-treated baseboard, and a full stain finish across the rebuilt fence line, completed with free haul-away of all job-site debris.

A&O Texas Solutions removed an existing fence and installed a new cedar side-by-side fence with cap and trim detailing in Southlake, TX, combining 89 feet of 6-foot fencing with a 19-foot, 4-foot-tall screening section built specifically to conceal an outdoor AC unit. The project included a new gate, a pressure-treated baseboard, heavy-gauge metal posts set in concrete, and a solid paint stain finish across the entire fence.

A&O Texas Solutions removed an existing fence and installed a new 6-foot cedar side-by-side privacy fence spanning 60 linear feet in Mansfield, TX. The project included a new wood-framed gate, a stain finish on all cedar boards, and heavy-gauge metal posts set in concrete. The full build was completed over a 3-day schedule, from demolition through final cleanup and debris haul-away.

A&O Texas Solutions removed an existing fence and installed a new 6-foot cedar side-by-side privacy fence spanning 98 linear feet in Duncanville, TX, finished with a warm Pecan stain. The project included a new wood-framed gate, a pressure-treated baseboard, and heavy-gauge metal posts set in concrete. The full build was completed with free haul-away of all job-site debris.

A&O Texas Solutions replaced 13 damaged cedar pickets on an existing board-on-board fence with cap-and-trim detailing in Watauga, TX. The new pickets were finished with a Medium Brown stain to match the surrounding fence, using the existing posts and framework already in place. The project included free haul-away of all job-site debris.

A&O Texas Solutions removed an existing fence and installed a brand-new 6-foot cedar side-by-side privacy fence spanning 286 linear feet in Sunnyvale, TX. The project included pressure-treated rails and baseboard, heavy-gauge metal posts set in concrete, galvanized hardware, and a pre-dip stain finish on all cedar boards. The full build was completed over a 3-day schedule, from demolition through final cleanup and debris haul-away.

A&O Texas Solutions completed a full restaining project on an existing 8-foot wood privacy fence in DeSoto, TX. The 145 linear foot fence was refreshed using a labor-and-material stain service, with the client supplying the stain color of choice. The project was completed in 2–3 labor days, with no post replacement, baseboard work, or fence removal required, and included free haul-away of all job-site debris.