Showcase for Gates Projects in Texas

A&O Texas Solutions removed an existing fence corner and installed a new 6-foot cedar side-by-side fence section with a matching gate in Euless, TX. The project included a new 13-gauge metal post set in concrete, cedar cap and trim detailing, and a pre-dip stain finish to match the surrounding fence. The work was completed with free haul-away of all job-site debris.

A&O Texas Solutions removed an existing fence and installed a new 5-foot black wrought iron flat-top fence spanning 100 linear feet in Barry, TX. The project included an 8-foot-wide double gate attached with brackets, along with heavy-gauge metal posts set in concrete for long-term stability. The full build was completed over a 3-day schedule, from demolition through final cleanup and debris haul-away.

 A&O Texas Solutions removed an existing fence and installed a new 6-foot cedar fence spanning 205 linear feet in Westworth, TX. Per the estimate and sketch, the majority of the fence line was built in a side-by-side style with cap and trim, while a shorter double-wooden-fence section along the front of the property completed the perimeter. The project included two gates, one of which was provided at no charge, along with a pressure-treated baseboard, stain, and heavy-gauge metal posts set in concrete.

A&O Texas Solutions removed an old 4-foot-wide cedar gate and rebuilt it from scratch in Roanoke, TX, per the sketch annotation on the approved estimate (“Remove & rebuild new gate”). The new gate was built in a 6-foot-tall, side-by-side cedar style with a new metal post and finished in a Medium Brown stain. No additional linear footage of fence was included in this scope — the project is a focused single-gate rebuild rather than a full fence installation.

A&O Texas Solutions removed a section of existing fence and installed a new 6-foot cedar side-by-side fence section spanning 20 linear feet with a new gate in Arlington, TX. The project reused the existing posts wherever possible, adding only one new post, and included a pressure-treated baseboard along the new section. This is a focused gate and short fence-run project rather than a full-perimeter replacement.

A&O Texas Solutions removed an existing fence and installed a new 6-foot cedar side-by-side privacy fence spanning 60 linear feet in Mansfield, TX. The project included a new wood-framed gate, a stain finish on all cedar boards, and heavy-gauge metal posts set in concrete. The full build was completed over a 3-day schedule, from demolition through final cleanup and debris haul-away.

A&O Texas Solutions removed an existing fence and installed a new 6-foot cedar side-by-side privacy fence spanning 98 linear feet in Duncanville, TX, finished with a warm Pecan stain. The project included a new wood-framed gate, a pressure-treated baseboard, and heavy-gauge metal posts set in concrete. The full build was completed with free haul-away of all job-site debris.

A&O Texas Solutions removed an existing fence and installed a new 4-foot black wrought iron flat-top fence spanning 104 linear feet in Weatherford, TX. The project included three new gates set into the fence line, along with heavy-gauge metal posts set in concrete for long-term stability. The full build was completed over a 3-day schedule, from demolition through final cleanup and debris haul-away.

A&O Texas Solutions removed an existing fence and installed a new 8-foot cedar board-on-board fence with trim detailing, spanning 68 linear feet in Plano, TX. The project featured a custom arched gate, a double pressure-treated baseboard, heavy-gauge metal posts set in concrete, and a Dark Walnut stain finish across the entire fence. The full build was completed over a 3-day schedule, from demolition through final cleanup and debris haul-away.

A&O Texas Solutions removed an existing fence and installed a new 6-foot cedar side-by-side privacy fence spanning 65 linear feet in Arlington, TX, finished with a rich Mahogany stain. The project included a new wood-framed gate, a pressure-treated baseboard, and heavy-gauge metal posts set in concrete, with one post placed along the neighboring property line. The full build was completed with free haul-away of all job-site debris.

A&O Texas Solutions removed an existing fence and installed a new 6-foot cedar side-by-side privacy fence spanning 71 linear feet in Arlington, TX. The project included a new wood-framed gate, a pressure-treated baseboard, and heavy-gauge metal posts set in concrete. The full build was completed over a 3-day schedule, from demolition through final cleanup and debris haul-away, with stain color to be finalized with the homeowner.

Residential 6 ft Cedar Fence in Fort Worth with two gates, including a 14 ft double drive gate.